Heat Treatment of Modified 6005A Alloy for Vehicles
摘要
Modified 6005A alloy was reported and its mechanical properties were studied by tensile test, hardness measurement and TEM analysis. Results show that the favorable aging condition for 6005A is 175℃ for 8h, and the nose temperature of its TTP (Time-temperature-properties) curves is about 370℃. In a moderate temperature zone (270℃＜T＜390℃), the alloy has much high quench sensitivity. Therefore, in on-line extrusion, water spray quench and moderate temperature should be taken to enhance quench rate, then 6005A alloy can be quench hardened and its quenching distortion can be reduced
引用本文（GB/T 7714）
CAOLing-fei, WANGMing-pu, GuoMing-xing, 等. Heat Treatment of Modified 6005A Alloy for Vehicles[J]. 材料热处理学报, 2004.
引文网络
本站仅收录题录与摘要供学习参考，全文版权归属出版方；如有侵权请联系我们删除。