首页 / 资料库 / 文献详情

Behavior of coal failure and permeability characteristics caused by liquid CO2 phase change fracturing

Zhao LIGuanhua NIZhenglin FULi GONGYuanmeng SHANGYingxue CUIMoyu LI

2025DOAJ (DOAJ: Directory of Open Access Journals)Engineering被引 2开放获取

出版方页面 →

摘要

Low methane extraction efficiency and prolonged treatment duration in deep, low-permeability coal seams constitute bottlenecks constraining safe and efficient coal mining. Liquid CO2 phase-change fracturing, as a water-free permeability enhancement measure, simultaneously avoids the water-lock effect in coal seams and displaces methane within coal, thereby intensifying extraction efficacy. To elucidate the mechanism by which liquid CO2 phase-change fracturing enhances coal permeability, coal samples from Shenmu Ningtiaota and Pingmei No.10 Mine were studied. Through Hopkinson bar dynamic impact tests, high-pressure CO2 fracturing tests, and triaxial compression-seepage tests, the fracture behavior and permeability characteristics of coal at different stages were investigated. Results indicate: As impact velocity increases, peak strain rate and dynamic peak strength of coal samples exhibit an upward trend. The failure mode of Shenmu coal shifts from splitting to crushing, with stress-strain curves lacking a secondary compression phase. Pingmei coal primarily exhibits splitting failure accompanied by pronounced strain hardening. A significant linear relationship exists between the vertical principal stress and the coal’s initiation pressure. For every 1 MPa increase in vertical principal stress, the initiation pressure increases by approximately 0.6 MPa. For the Shenmu coal sample with highly developed fractures, the fracturing effect primarily manifests as fracture connection and expansion. In contrast, for the structurally dense Pingmei coal sample, the effect mainly involves the formation of new fractures. Inclined fractures significantly degrade the mechanical strength of coal, substantially reducing the stress required for failure. Under confining pressure, peak stress in coal samples with inclined fractures decreased by approximately 50% compared to pristine coal, while permeability increased to 12.7−14.9 times that of pristine coal. The research reveals the thr

引用本文(GB/T 7714)

Zhao LI, Guanhua NI, Zhenglin FU, 等. Behavior of coal failure and permeability characteristics caused by liquid CO2 phase change fracturing[J]. DOAJ (DOAJ: Directory of Open Access Journals), 2025.

引文网络

参考文献与被引分析加载中…

DOI:https://doi.org/10.13225/j.cnki.jccs.w725.0197

本站仅收录题录与摘要供学习参考,全文版权归属出版方;如有侵权请联系我们删除。