Preparation and Arc Breakdown Behavior of Nanocrystalline W-Cu Electrical Contact Materials

Wenge、Chen、Zhanying、Kang、Bingjun、Ding Ding

2005Acta Scientiarum Naturalium Universitatis SunyatseniEngineering被引 8

摘要

Nanostructured (NS) W-Cu composite powder was prepared by mechanical alloying (MA), and nanostructured bulk of W-Cu contact material was fabricated by hot pressed sintering in an electrical vacuum furnace. The microstructure,electric conductivity, hardness, breakdown voltage and arcing time of NS W-Cu alloys were measured and compared to conventional W-Cu alloys prepared by powder metallurgy. The results show that microstructural refinement and uniformity can improve the breakdown behavior, the electric arc stability and the arc extinction ability of nanostructured W-Cu contacts materials. Also, the nanostructured W-Cu contact material shows the characteristic of spreading electric arcs, which is of benefit to electric arc erosion.

引用本文（GB/T 7714）

Wenge, Chen, Zhanying, 等. Preparation and Arc Breakdown Behavior of Nanocrystalline W-Cu Electrical Contact Materials[J]. Acta Scientiarum Naturalium Universitatis Sunyatseni, 2005.

引文网络

参考文献与被引分析加载中…

本站仅收录题录与摘要供学习参考，全文版权归属出版方；如有侵权请联系我们删除。