非均匀分光的硅线波导结构的1×2多模干涉分束器
摘要
Two types of 1×2 multi-mode interference(MMI)splitters with splitting ratios of 85:15 and 72:28 are designed.On the basis of a numerical simulation,an optimal length of the MMI section is obtained.Subsequently,the devices are fabricated and tested.The footprints of the rectangular MMI regions are only 3×18.2 and 3×14.3(μm).The minimum excess losses are 1.4 and 1.1 dB.The results of the test on the splitting ratios are consistent with designed values.The devices can be applied in ultra-compact photonic integrated circuits to realize the“tap”function.
引用本文（GB/T 7714）
Jingtao Zhou, Huajun Shen, Rui Jia, 等. 非均匀分光的硅线波导结构的1×2多模干涉分束器[J]. Chinese Optics Letters, 2011.
引文网络
本站仅收录题录与摘要供学习参考，全文版权归属出版方；如有侵权请联系我们删除。