Double shell slurry low-temperature corrosion tests

J.R. Divine、William M. Bowen、S.A. McPartland、R.P. Elmore、D.W. Engel

1983Materials Science被引 2开放获取

摘要

A series of year-long tests have been completed on potential double shell slurry (DSS) compositions at temperatures up to 100/sup 0/C. These tests have sought data on uniform corrosion, pitting, and stress-corrosion cracking. No indication of the latter two types of corrosion were observed within the test matrix. Corrosion rates after four months were generally below the 1 mpy (25 ..mu..m/y) design limit. By the end of twelve months all results were below this limit and, except for very concentrated mixtures, all were below 0.5 mpy. Prediction equations were generated from a model fitted to the data. The equations provide a rapid means of estimating the corrosion rate for proposed DSS compositions.

引用本文（GB/T 7714）

J.R. Divine, William M. Bowen, S.A. McPartland, 等. Double shell slurry low-temperature corrosion tests[J]. 未知来源, 1983.

引文网络

参考文献与被引分析加载中…

DOI：https://doi.org/10.2172/5537558

本站仅收录题录与摘要供学习参考，全文版权归属出版方；如有侵权请联系我们删除。